Butt Connector

$0.1——0.5 USD

Ring insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-5.5mm2) in power cable with electronic equipment 2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC 4, Surface: Tin-plated 5, Insulated material: PVC, nylon 6, Wire specification/rated: According customer required The main products take references to the technical standards and quality requirements of advanced industrial countries such as...

$0.01——0.1 USD

Before wiring should be calibrated line, line end should be marked; The core should not be damaged when peeling the insulation layer; The cable and Copper Lugs connection should be uniform and firm, good conductivity; It is advisable to use a lug at the end of a multi-strand wire core, and the connection between the wire and the lug should be crimped. Spade insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-8mm2) in power cable with electronic...

$0.1——0.2 USD

To solve the problem when using the terminal, pay attention to the following phenomena: The first phenomenon: the wiring Cold-pressed Terminal is not in good contact. The metal conductor inside the wiring terminal is the core part of the terminal. It transfers the voltage, current or signal from the external wire or cable to the contact corresponding to its matching connector. Therefore, the contact must have excellent structure, reliable contact holding force and good electrical conductivity....

$0.001——0.008 USD

Copper Terminals crimping is usually the use of special Copper Tube Terminals machine for operation, it has very strict technical standards, mainly including: pull force size, symmetry...And so on.A Cold-pressed Terminal can not only ensure the integrity of mechanical strength but also meet the requirements of electronic aspects, the following will be introduced in the form of pictures in general naked eye conditions can be identified by the improper crimping terminal products. CORD-END...

$0.01——0.1 USD

Some electrical Copper Terminals construction personnel in laying wires, often do not pay attention to the installation quality: Do not install sleeve where Insulated Terminalssleeve should be used; Junction boxes are not installed where they should be; Even in the wire joint is not the use of twisted connection method, but the use of illegal hook hook connection method. The contact resistance of this kind of curved hook connection method is very large, and when it is powered on, it is...

$0.01——0.1 USD

Cold-pressed Terminal storage life can be long or short, long months years, short days, weeks, some need to make long-term inventory plan for customers, while others order production immediately out of storage. Copper Tube Terminals reliability and storage life can be improved by adopting a first-in, first-out inventory strategy, a traceability label system, proper packaging, corrosion prevention, improved storage conditions, and proper terminal material and design. Cross the river Song Zhiwen...

$0.01——0.1 USD

The application of copper terminal is very extensive, in the industry is mainly to act as a connector, some electrical connection. Copper terminals can ensure the reliability and convenience of electrical circuit connection. The copper terminals is at the end of the wire and then use the special crimping pliers to connect the copper terminal to the wire and then fix the Copper Tube Terminals in the position you want to fix it. Usually Copper Terminals material is red copper, brass or phosphor...

$0.01——0.5 USD

In order to ensure the reliability of Copper Terminals quality and good use effect, it is necessary to carry out a series of effective preventive reliability tests according to the technical requirements of the standard. First of all, attention should be paid to prevent poor contact of wiring terminals. So how do you do this? Generally speaking, users need to conduct conduction detection after installation. The next step is transient detection, because some of the Copper Tube Terminals are...

$0.01——0.05 USD

Our choice of Copper Tube Terminals must be genuine, in the overall use of the need to use safety in line with national standards of products is very necessary, for these different manufacturers of products we try to choose the standard is GB14048.7/8 such a product, for the terminal itself on the different standards make the function is different, Try to be considerate in your choices. Ring insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section...

$0.01——0.05 USD

Copper Tube Terminals block, commonly used English letters and numbers, or with Chinese phonetic alphabet plus numbers, to indicate the terminal block maximum contact point current flux, as well as terminal block size and number of endpoints, but also used to show the manufacturer series of products model. Ring insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-5.5mm2) in power cable with electronic equipment 2, Material: They are made of higher...

$0.01——0.05 USD

The function of the terminal block is to connect the lines of the equipment inside the screen and the external equipment, and play the role of signal (current and voltage) transmission. With the terminal block, making the wiring beautiful, convenient maintenance, in the remote line between the connection is mainly firm, convenient construction and maintenance. Ring insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-5.5mm2) in power cable with...

$0.001——0.008 USD

There are usually models with reinforcing screws in plug and pull type, spring type and fence type wiring Copper Tube Terminals. The model with letter "M" in the electric terminal of tandem strapdown is with reinforcing screws, also known as "flange". Reinforcement screws are screws and nuts that fix terminals at both ends. With the expansion of the application range of conventional terminals, the extreme electrical connection environment also puts forward more stringent requirements for the...

$0.05——0.1 USD

Cold-pressed Terminal block refers to a series of combined wiring fixtures in electrical engineering. The number of terminals in each row is different, and the model can be determined according to the needs of engineering technical parameters. The application of terminal block is mainly reflected in: in power electronic wiring, when the equipment inside the screen is connected with the equipment outside the screen, some special terminal blocks should be used. When these terminal blocks are...

$0.01——0.1 USD

The most pivotal is the processing of wiring Copper Terminals thread, thread processing is not good, the torque is not up to standard then lost the role of connecting wire. The thread refers to the thread of the wiring cold-pressed Terminal on the Insulated Terminalst, so as to connect with the field joint. For example, some two-wire transmitters on the industrial site are commonly used to fix the thread specifications of the joint of the wiring cable. Insulated bullet/socket Copper Terminals...

$0.1——0.5 USD

The most pivotal is the processing of wiring Copper Tube Terminals thread, thread processing is not good, the torque is not up to standard then lost the role of connecting wire. The thread refers to the thread of the wiring terminal on the instrument, so as to connect with the field joint. For example, some two-wire transmitters on the industrial site are commonly used to fix the thread specifications of the joint of the wiring cable. Copper Terminals design, material selection and processing...

$0.01——0.5 USD

In China, the Copper Terminals industry has been in the low-end market sales range, and occupy a higher market share. With the continuous requirements of terminal products, many manufacturers gradually enter the high-end market, at the same time, the price war is also going on with vigour and vitality. In view of the strong labor resources, the domestic has always maintained a higher income model, the Cold-pressed Terminal products required by the industry can be purchased in the market, the...

$0.1——0.5 USD

The copper terminal must withstand the high temperature in the preheating zone and the temperature transmitted to the terminal body by wave soldering during the whole assembly process. Flux must not affect terminals and must be easily removed without any residue. The entire assembly process must be water-washable. Preheating temperatures are often 100°C or higher, and peak temperatures of 280°C are not uncommon. Perforated soldering pins must be accurately positioned, of suitable size, evenly...

$0.05——0.1 USD

Spade insulated terminals T Copper Tube Terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-8mm2) in power cable with electronic equipment 2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC 4, Surface: Tin-plated 5, Insulated material: PVC, nylon 6, Wire specification/rated: According customer required 7, Attribute: Pre-insulated, blade shape The company has more than 95% of the full automatic production...

$0.05——0.1 USD

Spade insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-8mm2) in power cable with electronic equipment 2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC 4, Surface: Tin-plated 5, Insulated material: PVC, nylon 6, Wire specification/rated: According customer required 7, Attribute: Pre-insulated, blade shape Conecting Terminals Without Screws The company has more than 95% of the full automatic...

$0.05——0.1 USD

Don't you see gao Hall mirror sad white hair, such as hair twilight snow. Spade insulated terminals T Copper Tube Terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-8mm2) in power cable with electronic equipment 2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC 4, Surface: Tin-plated 5, Insulated material: PVC, nylon 6, Wire specification/rated: According customer required 7, Attribute: Pre-insulated,...