Cable Lugs

$0.01——0.1 USD

The next step is transient detection, because some of the Copper Terminals are actually used under dynamic vibration conditions. Testing static contact resistance alone does not guarantee reliable contact in dynamic environment. This is because often the contact resistance of the connector is qualified in vibration, impact and other simulated environmental tests still appear instant power failure phenomenon. Therefore, for some products with high reliability requirements, dynamic vibration test...

$0.1——0.2 USD

To solve the problem when using the Cold-pressed Terminal, pay attention to the following phenomena: The first phenomenon: the wiring Copper Tube Terminals is not in good contact. The metal conductor inside the wiring terminal is the core part of the terminal. It transfers the voltage, current or signal from the external wire or cable to the contact corresponding to its matching connector. Therefore, the contact must have excellent structure, reliable contact holding force and good electrical...

$0.1——0.2 USD

Contact force is one of the basic elements in terminal blocks. If there is not enough contact pressure, a good conductive material is of no use. Because, if the contact force is too low, there will be displacement between the wire and the conductive sheet, resulting in oxidative pollution, so that the contact resistance increases and lead to overheating. In the case of the DRTB2.5 pressed wire frame assembly, an actual contact force of up to 750N can be generated by applying only 0.8Nm of...

$0.1——0.2 USD

To solve the problem when using the terminal, pay attention to the following phenomena: The first phenomenon: the wiring Cold-pressed Terminal is not in good contact. The metal conductor inside the wiring terminal is the core part of the terminal. It transfers the voltage, current or signal from the external wire or cable to the contact corresponding to its matching connector. Therefore, the contact must have excellent structure, reliable contact holding force and good electrical conductivity....

$0.01——0.1 USD

The application of copper terminal is very extensive, in the industry is mainly to act as a connector, some electrical connection. Copper terminals can ensure the reliability and convenience of electrical circuit connection. The copper terminal is at the end of the wire and then use the special crimping pliers to connect the copper terminal to the wire and then fix the Cold-pressed Terminal in the position you want to fix it. Usually copper terminal material is red copper, brass or phosphor...

$0.01——0.5 USD

Ring insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-5.5mm2) in power cable with electronic equipment 2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC 4, Surface: Tin-plated 5, Insulated material: PVC, nylon 6, Wire specification/rated: According customer required The main products take references to the technical standards and quality requirements of advanced industrial countries such as...

$0.01——0.5 USD

Ring insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-5.5mm2) in power cable with electronic equipment 2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC 4, Surface: Tin-plated 5, Insulated material: PVC, nylon 6, Wire specification/rated: According customer required The main products take references to the technical standards and quality requirements of advanced industrial countries such as...

$0.01——0.1 USD

Spade insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-8mm2) in power cable with electronic equipment 2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC 4, Surface: Tin-plated 5, Insulated material: PVC, nylon 6, Wire specification/rated: According customer required 7, Attribute: Pre-insulated, blade shape Copper Tube Terminals The company has more than 95% of the full automatic production...

$0.1——0.5 USD

The storage environment of Copper Terminals is specified in the general and detailed specifications for most Copper Lugs. For example, SJ331 stipulated that the environmental conditions of semiconductor integrated circuit storage are: -10℃ ~ +40℃, RH≤80%; The US Military standard for semiconductor integrated circuit storage environment temperature range from -65℃ to +150℃. However, these standards only specify the storage environment that is not allowed to exceed the range, not the optimal...

$ 0.1 Piece/Pieces

If the terminals are not crimped correctly on the cable, you will forget all the hard work that went into selecting the right terminals. While there are common crimping height issues that can reduce the reliability of your product, they can be easily avoided with a little knowledge and foresight. The crimp height is the cross section height of the body crimp area after crimp, and it is the most important feature of good crimp.Terminal manufacturers have increased the crimp height for each cable...

$ 0.1 Piece/Pieces

Copper Terminals is a kind of accessory for electrical connections, which can be crimped on cable/wire/ electrical equipment without Copper Lugs treatment. Our company, Taixing Longyi Terminals Co., Ltd, supplies a wide range of premium quality lugs to satisfy different demands Copper Lugs. Our products are designed, manufactured and tested as per CE and GB standards to ensure good performance. These products are suitable for the connection of Copper Tube Terminals with electrical equipments....

$0.01——0.1 USD

Cold-pressed Terminal storage life can be long or short, long months years, short days, weeks, some need to make long-term inventory plan for customers, while others order production immediately out of storage. Copper Tube Terminals reliability and storage life can be improved by adopting a first-in, first-out inventory strategy, a traceability label system, proper packaging, corrosion prevention, improved storage conditions, and proper terminal material and design. Cross the river Song Zhiwen...

$0.1——0.5 USD

Ring insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-5.5mm2) in power cable with electronic equipment 2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC 4, Surface: Tin-plated 5, Insulated material: PVC, nylon 6, Wire specification/rated: According customer required The main products take references to the technical standards and quality requirements of advanced industrial countries such as...

$0.01——0.1 USD

We usually say Cold-pressed Terminal have what bad problems, there are many reasons is caused by improper use, terminal plastic insulation materials and conductive parts is directly related to the quality of the terminal, a lot of the time our technical operation error, terminal blocks appear problem, must touch the part of the conduction conduction, and secure touch firmer. Insulation parts should not be conductive must be insulated. Most of the time the problem of the terminal is poor...

$0.01——0.1 USD

When it comes to the spirit of the industry, more people may think of the spirit of innovation, team spirit, etc., but today Longyi Copper Terminals to talk about pragmatic and anti-counterfeiting spirit. We are in the era of information explosion, and the dissemination of information is characterized by fast speed and wide range. Then how should the information recipient choose information and what kind of information should the information publisher convey to the audience? This is a topic...

$0.1——0.5 USD

When the heat-shrinkable casing is used as wire marking, the wire marking should be set on the wire before crimping, and then the crimping work should be carried out. Do not use the heat shrink tubing on the one-sidedness of the cord end Copper Tube Terminals. If a yellow cage terminal is used, the heat shrink tubing should be used at the place where the cable jacket is removed from the distance of 11mm. The insertion of wire marking shall be the insertion of marking data or English letters...

$0.1——0.5 USD

Suitable cord end terminals should be used according to the cross section of the wire, and the specifications and models should be exactly the same. The length of cable sheath stripped meets the requirements and the specified length is appropriate. All the wires of the wires are completely wrapped in the cord end terminal, and there is no scattered copper wire. The crimping part meets the requirements, and the specified crimping part is appropriate. Ring insulated terminals 1, cable lugs are...

$0.01——0.1 USD

The application of copper terminal is very extensive, in the industry is mainly to act as a connector, some electrical connection. Copper terminals can ensure the reliability and convenience of electrical circuit connection. The copper terminals is at the end of the wire and then use the special crimping pliers to connect the copper terminal to the wire and then fix the Copper Tube Terminals in the position you want to fix it. Usually Copper Terminals material is red copper, brass or phosphor...

$0.01——0.1 USD

The task of maintaining the sustainable development of Copper Terminals industry is still very difficult. Terminal to break through the traditional framework of the enterprise, do a real terminal terminal enterprise, it is necessary to pay attention to efficiency, efficiency, cost, management, in accordance with the law of Non-insulated Tubular Lugs Terminals industry development to handle things, break through the shackle of the traditional framework of terminal, enterprise system and...

$0.01——0.05 USD

Our choice of Copper Tube Terminals must be genuine, in the overall use of the need to use safety in line with national standards of products is very necessary, for these different manufacturers of products we try to choose the standard is GB14048.7/8 such a product, for the terminal itself on the different standards make the function is different, Try to be considerate in your choices. Ring insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section...